Still Running… But is it reliable?

When the Plan Unravels: Swinging Loads & Missing Procedures

The JHA was done. The OEM procedure was on the table. The crew were trying to do the right thing. And a worker still ended up on the ground with a serious leg laceration. In this episode, Pete and Drew break down Safety Alert SA24-04 from NSW Resources Regulator — a haul truck rear strut replacement that went wrong the moment the plan changed and there was no documented fallback to catch the team. Running the incident through the JEBS PCR Triad, Pete and Drew unpack how a fit-for-purpose lifting jig sitting unused on site exposed a critical gap in procedure and training, how the cost of a procedure rewrite before the job dwarfs the operational and human toll of not doing it, and how the absence of hold points left a partially-pinned, hundreds-of-kilogram strut with nothing stopping it from pivoting into a worker on the access platform. When the lift method stops working mid-job, your procedure needs to have an answer. This one didn't. Break Tip: Before your next cylinder, suspension, or driveline component replacement hits the board — pull the procedure and ask whether it calls out an independent means of restraint at every stage of the lift. If the lifting jig isn't referenced and your crew hasn't been trained on it, that's your gap. Close it before the job starts. The full Safety Alert details can be found here: https://www.resources.nsw.gov.au/sites/default/files/2024-10/safety-alert-sa24-04-haul-truck-rear-strut-injures-worker.pdf [https://www.resources.nsw.gov.au/sites/default/files/2024-10/safety-alert-sa24-04-haul-truck-rear-strut-injures-worker.pdf]

Still Running… But is it reliable?

Is your plant running because it's reliable — or because your team is holding it together with workarounds and tribal knowledge? In this episode, Pete and Drew tackle one of the most common misconceptions in maintenance: that reliability just means fewer breakdowns. They break down what reliability actually is, why availability and maintenance aren't the same thing, and how to tell the difference between a healthy asset and one that's surviving on heroics.  Break Tip: Walk the plant and identify the top three assets your team always complains about.  Against each one ask yourself this one question and document the answer. Why does this asset keep making the list?

No Visibility, No Control: Fixing the Off-Site Repair Process

You send a gearbox out the gate and it vanishes. No status update, no confirmed lead time, and an invoice that lands like a lead balloon much larger than you expect. Sound familiar? In this episode, Pete and Drew shine a light on the "Off-Site Black Hole" — the fragmented repair process quietly leaking millions from maintenance budgets across the industry. Running the problem through the JEBS PCR Triad, Pete and Drew break down how unknown rebuild lead times wreck your component replacement schedule, how poor scope management and ignored warranty claims mean many operations are paying twice for the same repair, and how "vendor drift" — where rebuilds slowly drift away from your standard — is destroying component life one early component change at a time. The fix isn't complicated. It's visibility, process, and the willingness to stop being a passenger on your own purchase orders. Break Tip: Pick your top five most expensive off-site repairable items and pull two years of history. Check if any failed early — then find out if a warranty claim was ever lodged. You might just uncover hundreds of thousands of dollars sitting on the table.

When Jumpstarts Become Normal: Chronic Failures & the Cost of Looking Away

Nobody questions the jump-start ute — until someone does. In this episode, Pete and Drew break down a chronic breakdown event where a dedicated vehicle and fitter were burning up to eight hours a shift just getting trucks to start, and the whole site had simply accepted it as normal. It took one reliability professional sacrificing a night's sleep, sitting in the ute on the go-line, to find the culprit: operators leaving their work lights on during crib breaks. Running the event through the JEBS PCR Triad, Pete and Drew unpack how chronic short stoppages quietly destroy your circuit efficiency, how skilled labour gets wasted on work a light switch should prevent, and how an extra light vehicle on the heavy vehicle go-line is a risk hiding in plain sight. The procedure already had the answer. Nobody was following it. Break Tip: Find your chronic failure — the one your team has become so efficient at fixing that nobody questions it anymore. Get off the spreadsheet, get into the field, and really understand what's driving it. You might be surprised how simple the fix actually is.

Single Point of Failure: Guardrails, Modifications & the EX5600 Incident

Four metres. That's not a stumble — that's a life-changer. In this episode, Pete and Drew break down Safety Alert SA26-02 out of the Hunter Valley, where a worker fell from a Hitachi EX5600 excavator after a guardrail stanchion — weakened by an aftermarket modification and an undetected crack — simply snapped. Running the incident through the JEBS PCR Triad, Pete and Drew unpack how chasing Performance through platform modifications introduced hidden failure, how ignoring the small Cost of a repair weld led to millions in lost production while the investigation was carried out, and how normalised Risk blindness let a cracked stanchion surviving operator pre-starts, fortnightly PMs, and dedicated structural inspections alike. The hard truth? "Tick and flick" inspections and equipment blindness don't just hurt your asset — they put your mates on the ground. Break Tip: Next time you're on an excavator or walking the plant, take a critical look at the walkway guardrails and stanchion posts around you. If something's not right, don't assume it's already been reported — follow through and get it into the system. That's how you keep your mates safe. The full Safety Alert details can be found here: https://www.resources.nsw.gov.au/sites/default/files/2026-03/SA26-02-fall-from-excavator-breaks-workers-legs.pdf [https://www.resources.nsw.gov.au/sites/default/files/2026-03/SA26-02-fall-from-excavator-breaks-workers-legs.pdf]