What Disconnected Data Is Actually Costing You - CADTALK CEO Scott Brickler, Part 2

PLM Decoded: What Manufacturers Need to Know – Mike Halladay of Arena PLM, Part 1

If you've ever confused PLM with PDM — or wondered whether your company even needs a PLM system — this episode is for you. Host Jeff Brickler sits down with CADTALK founder & CEO Scott Brickler and Mike Halladay, Solution Consultant at Arena PLM (a PTC product), to cut through the acronyms and get practical about what Product Lifecycle Management actually does, who needs it, and how AI is starting to change the game. ________________________________________ 🔑 Key Takeaways • PLM ≠ PDM. PDM manages CAD files. PLM is your single source of truth for the entire product record — mechanical, electrical, software, packaging, documentation, and more. • PLM and ERP serve different purposes. ERP is a transaction system built around what you're producing today. PLM manages all work-in-process as your product evolves from one producible revision to the next. • Change control is where PLM earns its keep. A formal revision control process ensures that only approved, complete product definitions make it into production — protecting manufacturers from costly errors. • Regulated and complex-product industries benefit most. Medical device, defense, high-tech, and any company managing multi-department product records will find the highest ROI in PLM. • Even ETO companies can benefit. If you're reusing subsystems across engineered-to-order projects, PLM keeps those subsystems well-managed and revision-controlled. ________________________________________ 💬 Best Quote "PLM is the system you use for all of your work in process — as you go from the last producible revision of your product to the next." — Mike Halladay, Arena PLM ________________________________________ ⏱ Timestamps • 0:00 – Welcome & guest introductions • 1:27 – PDM vs. PLM: What's the actual difference? • 3:01 – Where PLM fits vs. ERP (and why ERP isn't enough) • 4:46 – Revision control: PLM's core superpower • 6:31 – PLM for configure-to-order & engineer-to-order manufacturers • 9:53 – The engineering change process: when does it cross from PLM to ERP? • 15:38 – Which industries and company profiles benefit most from PLM?

The Path Forward: How to Make Your ERP Investment Actually Pay Off - CADTALK CEO Scott Brickler, Part 3

You understand the problem. You know what it costs. Now what? In Part 3, CADTALK CEO Scott Brickler lays out the path forward — including why the integration conversation needs to happen earlier than almost everyone thinks, and why the decision is a business one, not a technical one. In this episode, Scott and host John Thomas discuss: * What a good ERP implementer actually tells you — and the questions to ask before you commit * Why bringing integration into the conversation early changes the entire ERP design process * The crawl-walk-run approach to ERP and integration: how to stack improvements without the big bang risk Key takeaway: "Integration isn't a technical project. It's the thing that determines whether your ERP investment delivers what it was bought to deliver." Connect with CADTALK: https://cadtalk.com [https://cadtalk.com]

What Disconnected Data Is Actually Costing You - CADTALK CEO Scott Brickler, Part 2

Most manufacturers know they have a gap between engineering and their ERP. They've known for years. But when you've been working around something long enough, it stops feeling like a problem and starts feeling like just how things are. In Part 2 of our conversation with CADTALK CEO Scott Brickler, we get into what that gap is actually costing — not just in keystrokes, but in lead time, talent, decisions, and risk. 🎙️ Guest: Scott Brickler, CEO at CADTALK Software 🔗 https://www.linkedin.com/in/scottbrickler/ [https://www.linkedin.com/in/scottbrickler/] ⏱️ Timestamps: 0:00 — Recap and transition: from "what's broken" to "what does it cost" 0:51 — Labor shortages, tariffs, and why manual processes hurt more now 1:49 — Why engineers sign up for creative work — and what happens when they don't get it 2:07 — Agentic AI can only remix what exists — the human creative edge 3:07 — The "managing by exception" misconception — it's actually lack of clarity 4:00 — Jim in building B: when tribal knowledge becomes operational risk 4:16 — "Don't go into the illusion that everything's an exception" 5:51 — The talent retention argument: tools that remove friction attract the best people 6:27 — What happens when the only person who understands the spreadsheet leaves 6:55 — Transition: from the cost of the problem to the path forward 📌 Key Takeaways: • The cost of disconnected data isn't just in re-keying — it shows up in lead time, quoting errors, purchasing mistakes, and compliance risk • In a labor-scarce environment, engineers who spend time on data entry are engineers you can't recruit or retain • "Managing by exception" sounds like loss of control — it's actually the result of gaining clarity • The single-person dependency ("Jim in building B who just makes it work") is one of the most underestimated operational risks in manufacturing • What looks like "too much variability to automate" is usually just a lack of clarity about what the process actually needs to be 🔗 Resources Mentioned: • Schedule a discovery session: cadtalk.com [http://cadtalk.com] 👉 Learn more about CADTALK: https://cadtalk.com [https://cadtalk.com]

Why Your ERP Isn't Delivering What It Promised - CADTALK CEO Scott Brickler, Part 1

Manufacturers spend six or seven figures on ERP systems — and most aren't getting the ROI they were promised. CADTALK CEO Scott Brickler explains why the ERP isn't the problem, and what is. In this episode, Scott and host John Thomas discuss: * Why the bill of material is the engine everything in manufacturing ERP runs on — and why getting it right is harder than anyone admits * The "ERP demo problem" — why it always works in demos, and what happens when real data hits the system * Why "consistently wrong" beats "sporadically right" — and what that means for your engineering data Key takeaway: "Your ERP is only as good as the data you feed it." Connect with CADTALK: https://cadtalk.com [https://cadtalk.com]

Your Factory Already Runs on AI — You Just Don't Call It That - Rob Jolliffe of Sabre Limited, Part 3

Here's a take that might surprise you: manufacturing has had AI longer than almost any other industry. In this episode — "Your Factory Already Runs on AI — You Just Don't Call It That" — Rob Jolliffe, CEO of Sabre Limited, wraps up his conversation with hosts Jeff and Scott Brickler by tackling the AI hype head-on. Rob makes the case that MRP is an expert system, manufacturing has been running on AI for decades — so why does the current conversation feel so disconnected? The discussion covers why AI pitches keep missing the mark with manufacturers, where the real opportunity lies (it's not replacing what already works), and practical use cases like automated vendor follow-up, real-time material substitution, and intelligent PO review. Rob and Scott explore why the most valuable AI applications are the tasks that are too onerous for humans at scale but too costly to skip. Key Takeaways: * MRP and finite capacity planning are expert systems — manufacturing has had AI for decades * Current AI pitches often try to solve problems existing systems already handle * The real opportunity is in tasks too onerous for humans: vendor follow-up, PO review, material substitutions * AI should enable the thousands of small decisions humans currently skip * Business Central's extension model allows add-ons to coexist without conflict * Goldratt's insight: the obvious use case for new technology is rarely the most valuable one Connect with our guest: Rob Jolliffe | LinkedIn: https://www.linkedin.com/in/robjolliffe/ [https://www.linkedin.com/in/robjolliffe/] Sabre Limited: https://www.sabrelimited.com [https://www.sabrelimited.com] Follow CADTALK: CADTALK's Website: https://cadtalk.com [https://cadtalk.com] Follow CADTALK on YouTube (video episodes found here): https://www.youtube.com/@cadtalk6667 [https://www.youtube.com/@cadtalk6667] Follow CADTALK on LinkedIn: https://www.linkedin.com/company/cadtalk [https://www.linkedin.com/company/cadtalk]