Feeding the Beast (featuring Mark Bell)

Toughest Damage Mechanisms Don't Give Advanced Warnings (featuring Chad Patschke)

Chad Patschke is back on the podcast to discuss the toughest damage mechanisms in refining and chemical industries. Based on his years of process safety expertise, he emphasizes that the toughest damage mechanisms offer very little warning like HTHA, corrosion under insulation (CUI), and buried piping/soil-to-air interfaces. There are many pros and cons of using drones, robotics, and artificial intelligence (AI) in your inspections; however, Chad warns that these technologies can create an overwhelming amount of data and should never replace human judgment guided by field experience, process knowledge, and IOW exceedances. They address audit findings around insufficient data analysis, managing mountains of data, and using RBI as ongoing surveillance to detect “snakes in the grass.”  Chad explains barriers to CML optimization, especially liability fears, and stresses documented management systems, cross-functional buy-in, defensibility, and root-cause focus when leaks occur. Building on his pragmatic approach to PSM audits, Chad shares several concerns about the increase in incidents since COVID, recommending that as an industry we need to work together to re-instill the importance of process safety in younger personnel.  Take a listen to a pragmatic approach to mechanical integrity that builds on Chad’s lessons learned after decades of conducting field audits.   If you missed Part 1 “Don’t Compromise on these Pillars of Mechanical Integrity [https://www.buzzsprout.com/2489029/episodes/19173362]”, listen today on uponfurtherinspection.com [https://www.buzzsprout.com/2489029/episodes/19173362].  00:00 Damage Mechanisms That Surprise 01:33 CUI Funding and Execution 02:30 Buried Piping Blind Spots 03:07 Drones AI And Human Judgment 04:48 Data Overload and RBI Surveillance 06:37 CML Optimization and Liability Fear 09:59 Defensible Decisions After Leaks 13:07 Making DMR IOWs Actually Work 15:06 Shared Ownership NASCAR Model 16:31 Respect for Process and COVID Effects 21:25 Life at ETHOS And Pragmatic Audits 24:36 Picture of the Week Origin Story 26:24 Travel Fatigue and Hotel Routine 27:34 Life on the Road Balance 28:03 Contract Negotiation Headaches 28:51 Leaping into Entrepreneurship 29:49 Consulting Advice and Ethics 31:45 Communicating Findings Respectfully 32:43 APM Systems and Benchmarking 38:29 Data Migration and Cleanup Reality 41:54 NDE Data Quality and Vetting 43:13 How Audits Really Start 45:40 Best and Worst Site Assessments 46:56 Workbench Wisdom Right Tools   Episode Acronyms & Abbreviations API – American Petroleum Institute API 571 – Corrosion and Materials API 751 – Safe Operation of Hydrofluoric Acid Alkylation Units  CMLs – Corrosion Monitoring Locations CUI – Corrosion Under Insulation DMR – Damage Mechanism Review HTHA – High-Temperature Hydrogen Attack IDMS – Inspection Data Management System IOW – Integrity Operating Windows NDE – Non-Destructive Evaluation OFI – Opportunities for Improvement (part of the PSSAP) PSSAP – API’s Process Safety Site Assessment Program PPE – Personal Protective Equipment PSM – Process Safety Management RBI – Risk-based Inspection Send a text & tell us what you think! [https://www.buzzsprout.com/2489029/fan_mail/new] Thank you for listening to Upon Further Inspection! If you enjoyed this episode, be sure to follow or subscribe so you don’t miss the next one.   We’d love to hear from you—connect with us on LinkedIn and share your thoughts on the episode. Have ideas for future topics or guests? Email us at inspectionpodcast@gmail.com [inspectionpodcast@gmail.com]. Join us next time, wherever you get your podcasts. Until then, stay safe and stay informed. Note:  The views and opinions expressed by the guest are their own and do not necessarily reflect those of the hosts or the Upon Further Inspection podcast. This podcast is for informational purposes only and does not constitute legal or professional advice. Listeners should seek their own qualified advisors for guidance.

Don’t Compromise on these Pillars of Mechanical Integrity (featuring Chad Patschke)

“Office of the Week” guy, Chad Patschke, joins the hosts of Upon Further Inspection to share stories and insights from his 30+ year career in process safety and mechanical integrity (MI). Starting in 1992 with early Process Safety Management (PSM) rollout as a plant engineer, Chad discusses how the industry has shifted from a “bare minimum compliance” philosophy to valuing robust MI programs.  He reminisces about the challenge of convincing management to invest in prevention and the cyclical corporate attitude of cost-cutting followed by renewed standards after a major incident.  Chad emphasizes the importance of implementing sustainable, well-documented management systems and evergreening key tools like damage mechanism reviews, integrity operating windows (IOWs), and risk-based inspection (RBI) to improve near-miss learning and data analysis. Finally, in a special recognition to two previous UFI guests, Chad recognizes the value of his life-long mentors, John Reynolds and Mark Bell. Listen now for advice and valuable lessons in how to navigate the constantly evolving landscape of industrial safety.   1:30 Career Origins in PSM 05:02 From Plants to Consulting 07:11 PSM Culture Shift 11:01 Selling Safety to Management 16:56 The Industry Sine Wave 18:52 Building Sustainable MI Systems 22:22 PSM Maturity Across Industries 26:42 Audit Experience Worldwide 29:38 IOW and Damage Mechanisms 31:09 From CMLs to DMRs 32:39 NASCAR Program Analogy 35:04 Building Ownership Culture 37:50 Process Over People 44:07 AI for Data Insights 46:46 Evergreening MI Programs 49:41 80 20 Compliance Focus 55:10 Mentors Who Shaped Me   Episode Acronyms & Abbreviations AFPM – American Fuel & Petrochemical Manufacturers AIChE – American Institute of Chemical Engineers API – American Petroleum Institute API 751 – Safe Operation of Hydrofluoric Acid Alkylation Units CCD – Corrosion Control Documents CCPS – Center for Chemical Process Safety (non-profit within AIChE) CMLs – Corrosion Monitoring Locations CSB – US Chemical Safety & Hazard Investigation Board DMR – Damage Mechanism Review EPA – US Environmental Protection Agency IDMS – Inspection Data Management System IOW – Integrity Operating Windows MI – Mechanical Integrity NDE – Non-Destructive Evaluation OSHA – Occupational Safety and Health Administration PSM – Process Safety Management RBI – Risk-based Inspection  Send a text & tell us what you think! [https://www.buzzsprout.com/2489029/fan_mail/new] Thank you for listening to Upon Further Inspection! If you enjoyed this episode, be sure to follow or subscribe so you don’t miss the next one.   We’d love to hear from you—connect with us on LinkedIn and share your thoughts on the episode. Have ideas for future topics or guests? Email us at inspectionpodcast@gmail.com [inspectionpodcast@gmail.com]. Join us next time, wherever you get your podcasts. Until then, stay safe and stay informed. Note:  The views and opinions expressed by the guest are their own and do not necessarily reflect those of the hosts or the Upon Further Inspection podcast. This podcast is for informational purposes only and does not constitute legal or professional advice. Listeners should seek their own qualified advisors for guidance.

Feeding the Beast (featuring Mark Bell)

Upon Further Inspection welcomes Mark Bell back to the podcast with Part 2 of our discussion where he shares stories and insights from his decades of inspection and mechanical integrity experience.  As a member of the API/AFPM site assessment program, he has performed assessments and PSM audits across many companies. He highlights gaps he sees in smaller facilities: limited adoption of CCDs, IOWs, and effective RBI/IDMS use, often letting budgets drive wrong inspection techniques (e.g., spot UT instead of needed radiography). He recounts a 1988 explosion and other cases to stress how localized corrosion and unknown damage mechanisms can have catastrophic consequences, and argues for proactive corrosion engineers, field presence, mentoring, and a culture that rewards conservative shutdown decisions. He cautions that AI/RBI are only as good as their inputs and ownership. Listen now for practical, experience-based guidance on improving mechanical integrity and preventing repeat failures. If you missed part 1 “From Boilermaker to Expert”, please listen here [https://www.buzzsprout.com/2489029/episodes/18985065]. 00:39 Why Sites Must Share 01:09 Joining API APM Audits 04:44 Assessment Takeaways 05:41 Lessons from Site Explosion 10:04 Modern Tools CCD IOW 12:03 Mentors Who Shaped Me 16:31 Building A Strong Program 18:43 Budget Versus Right NDE 25:13 Spot UT Limits and Future 29:51 Corrosion Monitoring Debate 31:02 Credible Damage Mechanisms 33:02 CCDs Into Inspection Plans 34:29 Culture and Recognition 37:05 Hard Calls on Leaks 41:33 Field Communication Matters 43:11 AI Needs Good Data 45:09 RBI Garbage In, Garbage Out 49:31 RBI Horror Stories 52:24 Ownership Over Tools   Episode Acronyms & Abbreviations AP – American Petroleum Industry AFPM – American Fuel & Petrochemical Manufacturers CCDs – Corrosion Control Documents CMLs – Corrosion Monitoring Locations DMRs – Damage Mechanism Reviews IDMS – Inspection Data Management Systems IOWs – Integrity Operating Windows MOC – Management of Change PSM – Process Safety Management RBI – Risk-based Inspection RT – Radiographic Testing UT – Ultrasonic Testing Send a text & tell us what you think! [https://www.buzzsprout.com/2489029/fan_mail/new] Thank you for listening to Upon Further Inspection! If you enjoyed this episode, be sure to follow or subscribe so you don’t miss the next one.   We’d love to hear from you—connect with us on LinkedIn and share your thoughts on the episode. Have ideas for future topics or guests? Email us at inspectionpodcast@gmail.com [inspectionpodcast@gmail.com]. Join us next time, wherever you get your podcasts. Until then, stay safe and stay informed. Note:  The views and opinions expressed by the guest are their own and do not necessarily reflect those of the hosts or the Upon Further Inspection podcast. This podcast is for informational purposes only and does not constitute legal or professional advice. Listeners should seek their own qualified advisors for guidance.

From Boilermaker to Expert (featuring Mark Bell)

In this episode we welcome Mark Bell, a semi-retired fixed equipment consultant to the podcast. The animated discussion between Greg, Branden, and Mark provide a practical, experience-based look at how great inspectors are developed and how inspection quality is improved over time. Mark’s key takeaway is that effective mechanical integrity depends less on “having certifications” or flashy NDE outputs and more on disciplined learning, sound decision-making, qualified people, and repeatable data—especially for something as basic as UT thickness readings. He explains how mentorship, clear procedures, verification/testing of technician capability, and consistent practices (including global standardization and technical networks) can dramatically raise both the quality and usefulness of inspection data, helping plants move away from “hope is not a plan” toward reliable, trendable integrity decisions. 01:36 From Boilermaker to Inspector 05:16 Mentorship and Learning Culture 07:01 Decision Making as Inspector 08:37 Early NDE Tools and RT Focus 12:27 Picking Locations and Intervals 14:00 Three Wise Men Document 17:58 School and Career Motivation 21:13 API 510 Origins and First Test 23:21 Certifications Change the Role 24:34 Certs Versus Competence 25:45 Early Welding and NDE Exams 27:42 Spotting Fake Credentials 29:37 NDE Tech Evolution 32:07 PAUT Versus TOFD 35:20 Explaining Results to Management 36:30 Qualification and Performance Testing 38:45 Better Thickness Data 42:24 CML Trending Strategy 44:26 Using All the Data 46:18 Averaging to Reduce Error 49:57 Global Best Practices at Shell 54:26 Tech Networks and Productivity   Episode Acronyms & Abbreviations API 510 – Pressure Vessel Inspection Code API 570 – Piping Inspection Code & Inspector Certification API 571 – Damage Mechanisms Affecting Fixed Equipment API 653 – Tank Inspection, Repair, Alteration, & Reconstruction CML – Corrosion Monitoring Locations CWI – Certified welding inspector EP – Engineering practice EPRI – Electric Power Research Institute IDMS – Inspection Data Management Systems MFE – Multi-flow Evaluator NDE – Non-Destructive Evaluation PAUT – Phased Array Ultrasonic Testing RT – Radiographic Testing SFI – Slurry fracture injection TML – Thickness Monitoring Locations TOFD – Time of Flight Diffraction Technique UT – Ultrasonic Testing  Send a text & tell us what you think! [https://www.buzzsprout.com/2489029/fan_mail/new] Thank you for listening to Upon Further Inspection! If you enjoyed this episode, be sure to follow or subscribe so you don’t miss the next one.   We’d love to hear from you—connect with us on LinkedIn and share your thoughts on the episode. Have ideas for future topics or guests? Email us at inspectionpodcast@gmail.com [inspectionpodcast@gmail.com]. Join us next time, wherever you get your podcasts. Until then, stay safe and stay informed. Note:  The views and opinions expressed by the guest are their own and do not necessarily reflect those of the hosts or the Upon Further Inspection podcast. This podcast is for informational purposes only and does not constitute legal or professional advice. Listeners should seek their own qualified advisors for guidance.

Codes, Committees, and Critical Thinking (featuring Brent Ray)

In part 2 of our conversation with Brent Ray, we take a deeper look at his extensive work with industry codes and standards through API, ASME, and NBIC. Brent reflects on how reviewing a marked up draft of API 571 in 2003 helped launch a path that later included chairing API 581, API 580, the Subcommittee on Inspection and Mechanical Integrity, and the API Inspection Summit. Throughout the discussion, he discusses the challenge of writing standards that are both technically sound and accessible, and offers advice to young engineers trying to make sense of complex and overlapping guidance. Brent also gives listeners an inside look at the 10th API Inspection Summit coming to San Antonio in July 2026, including new divisions, expanded training, a charity golf tournament, and the much-anticipated “Gray Beards” panel. He shares candid career wisdom on navigating emerging standards like ASME Section 5 Subsection C, the challenge of bridging NBIC and fitness-for-service communities, and what he hopes his legacy will be: the engineer’s engineer. Whether you are active in codes and standards work, preparing to attend your first API Inspection Summit, or simply looking to strengthen your technical foundation, Brent's perspective offers valuable lessons on leadership, communication, and what it means to serve the broader industry.  Subscribe today so you don't miss our next episode! If you missed part 1 "Curiosity, Caves, & Carbon Steel", you can listen here [https://www.buzzsprout.com/2489029/episodes/18829394]. * 00:00  Introduction and API engagement origins * 00:49  Brent’s early history with codes and standards * 02:55  First API meeting experience  * 05:39  Chairing API 581 and saving it from sunset * 07:07  ASME PCC involvement and API subcommittee leadership * 07:50  API Inspection Summit chair role and cross-industry communication * 10:35  NBIC, state boiler inspectors, and the evolving role of fitness for service * 13:52  ASME Section 5 Subsection C — new in-service NDE rules explained * 18:38  Advice for young engineers navigating codes and standards * 22:27  Critical thinking, connecting the dots, and avoiding hasty conclusions * 25:19  Quick glossary: API 578, API 751, ASME PCC 1/2/3, PTB-2 * 29:36  API Inspection Summit 10th anniversary preview — San Antonio, July 2026 * 38:35  Career edification and taking one nugget a day from Summit * 41:15  Wildest process units: FCC catalyst and the Cuming unit explosion * 43:48  Career legacy — the engineer’s engineer * 45:36  Conclusion and podcast credits +++++++++++ Episode Acronyms & Abbreviations * AI — Artificial Intelligence * AMPP — Association for Materials Protection and Performance * API — American Petroleum Institute * APM — Asset Performance Management * ASME — American Society of Mechanical Engineers * EAP — Enterprise Asset Performance * FCC — Fluid Catalytic Cracking * HF Alky — Hydrofluoric Acid Alkylation * KPI — Key Performance Indicator * MI — Mechanical Integrity * NACE — National Association of Corrosion Engineers * NBIC — National Board Inspection Code * NDE — Nondestructive Examination * PCC — Post-Construction Committee (ASME) * PTB — Pressure Technical Bulletin (ASME) * RBI — Risk-Based Inspection * SCIMI — Subcommittee on Inspection and Mechanical Integrity (API) * TNT — Trinitrotoluene Send a text & tell us what you think! [https://www.buzzsprout.com/2489029/fan_mail/new] Thank you for listening to Upon Further Inspection! If you enjoyed this episode, be sure to follow or subscribe so you don’t miss the next one.   We’d love to hear from you—connect with us on LinkedIn and share your thoughts on the episode. Have ideas for future topics or guests? Email us at inspectionpodcast@gmail.com [inspectionpodcast@gmail.com]. Join us next time, wherever you get your podcasts. Until then, stay safe and stay informed. Note:  The views and opinions expressed by the guest are their own and do not necessarily reflect those of the hosts or the Upon Further Inspection podcast. This podcast is for informational purposes only and does not constitute legal or professional advice. Listeners should seek their own qualified advisors for guidance.