Mod Tune Win Repeat: Retuned

016: The Nissan Z proto 400Z – designing a car for a legacy

**This is a replay from the old podcast series lost to the internet** Original upload date: 26/11/2020 I’ve been able to live under a rock and avoid the hype around the Nissan 400Z release which was difficult being a made 240Z owner and fan. In this episode I emerge from under that rock and review the hype for myself raising the question, is if difficult for a manufacturer to design something unique while following the legacy of a classic? Watch the latest Built On Purpose YouTube video HERE [https://www.tubebuddy.com/quicknav/latest/UCh8Np8GqrDg7g7M_TWv-9iQ] Links YT: ⁠Built On Purpose⁠ [https://www.youtube.com/c/BuiltOnPurpose] IG: ⁠@built_on_purpose⁠ [https://www.instagram.com/built_on_purpose/%E2%81%A0] FB: ⁠Built On Purpose⁠ [https://www.facebook.com/builtonpurpose1] Shop: ⁠Kyusha Speed [https://kyushaspeed.com.au/]

015: OHV vs SOHC vs DOHC

**This is a replay from the old podcast series lost to the internet** Original upload date: 27/10/2020 There are three types of valve-train used in petrol engines and all three are still produced new. This a guide we're going to discuss OHV vs SOHC vs DOHC, the good the bad and the ugly of each. I've been lucky enough to own and fiddle with variants of all three. Bear in mind this is a generally overview and there will always be examples that push the limits or are highly efficient. Watch the latest Built On Purpose YouTube video HERE [https://www.tubebuddy.com/quicknav/latest/UCh8Np8GqrDg7g7M_TWv-9iQ] Links YT: ⁠Built On Purpose⁠ [https://www.youtube.com/c/BuiltOnPurpose] IG: ⁠@built_on_purpose⁠ [https://www.instagram.com/built_on_purpose/%E2%81%A0] FB: ⁠Built On Purpose⁠ [https://www.facebook.com/builtonpurpose1] Shop: ⁠Kyusha Speed [https://kyushaspeed.com.au/]

014: Cast vs forged pistons + piston materials

**This is a replay from the old podcast series lost to the internet** Original upload date: 13/10/2020 Cast and forged pistons are made from the same materials. Both types of pistons have the same density. So what makes forged pistons stronger than cast? Watch the latest YouTube video HERE [https://www.tubebuddy.com/quicknav/latest/UCh8Np8GqrDg7g7M_TWv-9iQ] Please leave a rating or review if this was useful and check out the rest of the podcast. Links YT: ⁠Built On Purpose⁠ [https://www.youtube.com/c/BuiltOnPurpose] IG: ⁠@built_on_purpose⁠ [https://www.instagram.com/built_on_purpose/%E2%81%A0] FB: ⁠Built On Purpose⁠ [https://www.facebook.com/builtonpurpose1] Shop: ⁠Kyusha Speed [https://kyushaspeed.com.au/]

013: Manifold port matching and engine intake reversion

**This is a replay from the old podcast series lost to the internet** Original upload date: 6/10/2020 Now, match porting manifolds. This is the process of modifying ports to align smoothly at the gasket, removing obstructions to the air flow pattern.   Why do this? Well let’s jump into some background info on fluid dynamics. Air is essentially a compressible liquid and conforms to hydraulics.   Whenever a fluid particle changes direction it loses energy. You might read about achieving laminar (or smooth) flow, a characteristic when certain velocities for a given situation are achieved that all the fluid particles move parallel with good efficiency, this is ideal for pipe flow but will never truly occur in an engine intake or exhaust.   Laminar flow requires continuous velocity and this state is not achieved. The flows are stop started by the natural operation of the valves.   For some applications there is benefit in having an uniform obstruction. Whaaat I hear you ask? Well, particularly in carburettor applications, the waves created from the valve operation can cause a phenomenon called reversion.   Carbs rely in vacuum to draw fuel into the air mixture and reversion can sometimes knock fuel particles out of the air stream and push them out the end of your intake. Not a real safe condition! Now having a uniform reduction or increase transition can capture and reduce the effect of reversion. Watch the latest YouTube video HERE [https://www.tubebuddy.com/quicknav/latest/UCh8Np8GqrDg7g7M_TWv-9iQ] Please leave a rating or review if this was useful and check out the rest of the podcast. Links YT: ⁠Built On Purpose⁠ [https://www.youtube.com/c/BuiltOnPurpose] IG: ⁠@built_on_purpose⁠ [https://www.instagram.com/built_on_purpose/%E2%81%A0] FB: ⁠Built On Purpose⁠ [https://www.facebook.com/builtonpurpose1] Shop: ⁠Kyusha Speed [https://kyushaspeed.com.au/]

012: Dynamic Compression Ratio + free calculator

**This is a replay from the old podcast series lost to the internet** Original upload date: 29/09/2020 What is dynamic compression ratio? It is not commonly known. Most are familiar with static compression ratio used to describe a characteristic of engine. But what is the difference of dynamic compression ratio vs static? Static compression ratio uses the volume associated with a full sweep of the piston from bottom dead centre through to top dead centre. Dynamic compression ratio is governed by the stroke derived from when the intake valve closes which is normally after bottom dead centre. Longer duration cams cause the intake valve to close later reducing the dynamic stroke and as such the dynamic compression ratio. Link to spreadsheet: https://kyushaspeed.com.au/shop/dynamic-compression-ratio-calculator/ [https://kyushaspeed.com.au/shop/dynamic-compression-ratio-calculator/] Link to blog: https://kyushaspeed.com.au/what-is-dynamic-compression-ratio/ [https://kyushaspeed.com.au/what-is-dynamic-compression-ratio/] Please leave a rating or review if this was useful and check out the rest of the podcast. Links YT: ⁠Built On Purpose⁠ [https://www.youtube.com/c/BuiltOnPurpose] IG: ⁠@built_on_purpose⁠ [https://www.instagram.com/built_on_purpose/%E2%81%A0] FB: ⁠Built On Purpose⁠ [https://www.facebook.com/builtonpurpose1] Shop: ⁠Kyusha Speed [https://kyushaspeed.com.au/]